Matrix E1X - ECB Belt Replacement

34
7.9 ECB (ELECTRONIC BRAKE) BELT REPLACEMENT
CHAPTER 7: PART REPLACEMENT GUIDE
1) Remove the front shrouds as outlined in Section 7.1.
2) Loosen the 2 nuts holding the ECB to the ECB mounting bracket (Figure A).
3) Remove the 2 tension eye bolts on the ECB mounting bracket (Figure B).
4) Remove the screw holding the ECB wire harness in place (Figure C).
5) Now that the tension has been loosened, pull the ECB up and remove the ECB belt (Figure D).
6)ReverseSteps1-5toinstallanewECBbelt.
7) Test the elliptical trainer for function as outlined in Section 7.21.
FIGURE A
FIGURE B
FIGURE C
FIGURE D