Matrix E1X - Pedal Arm Replacement

46
7.17 PEDAL ARM REPLACEMENT
CHAPTER 7: PART REPLACEMENT GUIDE
1) Remove the front shrouds as outlined in Section 7.1.
2) Pull the cap off of the crank / pedal arm connection (Figure A).
3) Remove the large nut holding the pedal arm to the crank (Figure B). NOTE: Be sure to notice the order of the washers as you remove
them for reinstallation (Figure C).
4) The front of the link arm can now be lifted away (Figure D).
FIGURE A FIGURE B
FIGURE D
FIGURE C