224 Matrix SATATYA Devices Manual
If ONVIF flag is checked and/or Brand name and model name is known/identified then the Camera is allowed to be
saved.
If Cameras are identified, then the detected brand name and model name is shown in respective fields. And the
Camera is allowed to be saved.
Advance Search
Click on Advance Search button to search for the cameras in other subnet.
IP Address Range: Specify the from and to IP address within which cameras are to be searched.
Camera Brand: Select the camera brand from the picklist.
HTTP Port: The HTTP port appears as per the camera brand selected.
Username/Password: The Username and Password appears as per the camera brand selected.
Click on OK to save the settings.
Step 2: Auto Configuration of Cameras
Select the Camera(s) which you want to auto configure from the search list and click on the Auto Configure button
as shown below: