Matrix SATATYA NVR0801X System Manual

242 Matrix SATATYA Devices Manual
Select the desired Camera from the drop-down list.
Configure the parameters of Alarm, COSEC, Manual, Scheduled Recording as well as Adaptive Recording as
described below:
Alarm Recording
Pre-Record: Set the time in seconds for pre-alarm event recordings before the actual recording begins on an alarm
event. Default pre-recording time is 5 seconds and the configurable range is from 0-15 second.
Post-Record: Set the time in seconds for post-alarm event recordings for the specified channel. Specify the
duration in seconds as per the site requirements. The configurable range is from 10-300 second.
COSEC Recording
Enable Pre-Record: Select the check box to enable pre-recording in COSEC Recording.
Pre-Record: Set the time in seconds for pre-event recording before the actual recording begins on a COSEC
event. Default pre-recording time is 5 seconds and the configurable range is from 0-15 second.
Manual Recording
Select the check box to enable the manual recording for the selected camera. If disabled, manual recording will not
be allowed.

Matrix SATATYA NVR0801X Specifications

General

Brand	Matrix
Model	SATATYA NVR0801X
Category	DVR
Language	English