Matrix SATATYA NVR0801X System Manual

Matrix SATATYA Devices Manual 245
Select the Camera Number by scrolling the up-down arrows. Then configure the parameters of Alarm, COSEC,
Manual or Scheduled Recording as described below:
Alarm Recording
Pre-Record: Set the time in seconds for pre-alarm event recordings before the actual recording begins on an alarm
event. Default pre-recording time is 5 seconds and the configurable range is from 0-15 second.
Post-Record: Set the time in seconds for post-alarm event recordings for the specified channel. Specify the
duration in seconds as per the site requirements. The configurable range is from 10-300 second.
COSEC Recording
Enable Pre-Record: Check the box to enable pre-recording in COSEC recording.
Pre-Record: Set the time in seconds for pre-event recording before the actual recording begins on a COSEC
event. Default pre-recording time is 5 seconds and the configurable range is from 0-15 second.
Manual Recording
Check the box to enable the manual recording for the selected camera. If disabled, manual recording shall not be
allowed.
Scheduled Recording
Check the box to enable the scheduled recording for the selected camera.

Matrix SATATYA NVR0801X Specifications

General

Brand	Matrix
Model	SATATYA NVR0801X
Category	DVR
Language	English