254 Matrix SATATYA Devices Manual
To edit an existing preset position, select the configured position in the Position field. Click on the Go button. The
camera will move to the preset position as already configured. Use the Preset Position arrow keys to move the
camera to a new position and click on the Save button.
Click on Delete button to delete a configured preset position. The PTZ tour can be started by clicking Resume
Tour.
Preset Tour
The Preset Tour functionality enables the administrator to create a PTZ tour with up to 20 preset positions. In order
to access this option, click on the Configuration option from the left pane of the device client page. Select the
Preset Tour option under Camera Settings. The Preset Tour Settings page appears as shown below.
Camera: Select the Camera Channel from the drop-down list where the PTZ Camera is connected.
Override Scheduled Tour by Manual Tour: Check the box to Enable the user to Start Manual Tour from the
monitoring window by clicking PTZ button.
Manual Preset Tour: Select the Tour from the drop down list which is to be manually operated from the PTZ
button of monitoring window. Before Selection of the Tour for Manual Operation, ensure that the Tour is configured.
Override Active Tour by PTZ Control: Check the box to Enable control of PTZ camera when PTZ tour is going
on. While doing PTZ control if tour is active then the active tour will get paused and resume when clicked on
resume button.
To Next Page
Loading...
Need help?
General
