Matrix SATATYA NVR0801X System Manual

Matrix SATATYA Devices Manual 299
System
The administrator can configure the system buzzer on the NVR to be activated based on the occurrence of system
events. Check this box to enable the option as shown.
The user can now select an Event Type and Action linkage as follows.
Event Type: Select the Event Type from the drop-down list. The available options are:
• Manual Trigger
• On Boot
• Storage Alert
• Disk Volume Full
• Disk Fault
• Scheduled Backup Fail
• Firmware Upgrade
Configure Action: Check the box to Enable the required Actions.
For setting different Actions, See “Action Schedule:” on page 294. on Camera Event and Action Settings.
Buzzer: Check the box to enable the action of Buzzer. This option is available in Systems only.
As per the detection of the events and running actions, user will get the respective icons on the camera monitoring
window, refer See “Icons on Monitoring Window” on page 300.

Matrix SATATYA NVR0801X Specifications

General

Brand	Matrix
Model	SATATYA NVR0801X
Category	DVR
Language	English