Matrix SATATYA Devices Manual 315
• Select the desired Auto Firmware Upgrade option — Never, Notify Only, Download and Upgrade.
Default: Never.
• Never: The NVRX will never initiate the Auto Firmware Upgrade process.
• Notify Only: When the firmware zip file of a version higher that the current NVRX firmware version is
present on the FTP, then an event will be generate.
When a new firmware is available, then the event will be logged in the Event Log against which the
user can configure the desired action. For details, refer to “Event and Action Settings”.
• Download and Upgrade: The NVRX will check the for new firmware files at regular intervals (as
configured in Daily At) on the FTP Server. If upgraded files are available these will be downloaded and
upgradation process will be initiated automatically.
To set the schedule, that is, the time interval after which the NVRX needs to check for new firmware
files on the FTP Server, you must configure the time interval in Daily At.
The system will reboot after Download and Upgrade of the firmware.
• Select the desired FTP Server — MATRIX COMSEC, Custom.
If you select MATRIX COMSEC, you do not have to configure the parameters —Address, Port, User
Name, Password, Firmware Path. These will appear blank but will be fetched automatically.
If you select Custom, you must configure the parameters —Address, Port, User Name, Password,
Firmware Path
• Configure the FTP Server Address on which the firmware files are stored. NVRX will fetch the firmware for
upgradation from here.
• Configure the Port. This is the FTP listening port on which FTP communication will be done.
• Configure the User Name of the FTP Server.
• Configure the Password of the FTP Server.
• Configure the Firmware Path, that is, the folder path on the FTP Server where the firmware zip files are
stored. You must enter the Path till the folder where the firmware exists.
For example: ftp://192.168.101.222:5000/Firmwares/NVR/16Channel/V7R12/
webNVR1602X_32X_64X_firmware_V07R08.zip is the FTP URL then, you must configure Firmwares/
NVR/16Channel as the Firmware Path.
• Click Check for Update, to manually check for firmware updates available on the FTP Server.
• Click Submit to save.
You can upgrade the firmware manually also, if you have the firmware files in your PC. For details refer to
Firmware Upgrade in “Manage”.
To Next Page
Loading...
Need help?
General
