156 Matrix SETU ATA211 V1 System Manual
System Commands
Command Meaning Allowed to?
11-WAN IP Address-#* To program the WAN IP Address Admin & User
12-LAN IP Address-#* To program the LAN IP Address Admin & User
13-Subnet Mask-#* To program the Subnet Mask of WAN port Admin & User
14-Subnet Mask-#* To program the Subnet Mask of LAN port Admin & User
15-Code-#* To program the connection type of WAN port. Admin & User
16-Code-#* To enable/ disable 'L2 VLAN/ CoS' on WAN port. Admin & User
21-Reverse Admin/User Password-#* To default the ATA211 Admin & User
31- #* To display the WAN IP Address on SLT Admin & User
32-#* To display the LAN IP address on SLT Admin & User
33-#* To display the WAN Subnet Mask on SLT Admin & User
34-#* To display the LAN Subnet Mask on SLT Admin & User
35-#* To display the gateway address on SLT Admin & User
36-#* To display the DNS address on SLT Admin & User
37-#* To display the connection type of WAN port on SLT Admin & User
38 - SIP Account - #* To display the registration status of SIP Admin & User
51-Destination Number-#* To program Call Forward-Unconditional number Admin & User
52-Code-#* Set/Cancel Call Forward-Unconditional Admin & User
53-Destination Number-#* To program Call Forward-When Busy number Admin & User
54-Code-#* Set/Cancel Call Forward-When Busy Admin & User
55-Destination Number-#* To program Call Forward-When No Reply number Admin & User
56-Code-#* Set/Cancel Call Forward-When No Reply Admin & User
57-Timer-#* Set Call Forward Timer Admin & User
61-Code-#* Set/Cancel DND Admin & User
66-SIP Account-Code-#* Send/Block Caller ID for SIP1, SIP2, SIP3 Only Admin
72-Code-#* Set/Cancel Call Waiting Admin & User
99-#* Cancel all features Admin & User
To Next Page
Loading...
Need help?
General
