21
Updating the Monarch HD firmware
4 Open the Matrox Monarch HD Utils, select the network IP Address of the
Monarch HD device that you want to update, and then click
Update
Selected
. If you have multiple Monarch HD devices on the network, select
the IP address for every device in the Matrox Monarch HD Utils by clicking
Select All, and then all Monarch HD devices will update in series.
¡ Important Do not disconnect the Monarch HD from the network or
power source during the firmware update.
¦NoteThe Monarch HD device will turn off and on at different times during
the update process. The update is complete when all LEDs turn off except the
Power ( ), Stream, Record, and USB port 1 LEDs.
To Next Page
Loading...
