54
Appendix B, Sharing a network folder
10 Now that you have created the shared folder, you must specify the folder
path in the Monarch Command Center.
When entering the path and filename, you must enter the IP address of the
location on the network to which you want to record, followed by the full
path to the shared folder from the root directory, and then the base name for
the file in the following format:
//IP address:/full path to shared folder/basename
For example, if you want to name your file “Recording1” and save the file to
a shared folder named “Files” that is located on the Desktop under “Matrox”
in the Users root directory folder on a network computer with an IP address
of “123.456.7.890”, enter the following:
//123.456.7.890:/Users/Matrox/Desktop/Files/Recording1
¥Tip You can obtain the full path to the shared folder by right-clicking the
folder, and then clicking
Get Info.
The Monarch can now record or transfer files to the shared folder.
To Next Page
Loading...
