138
Controls in detail
Seats
The red indicator lamps in the switch
show the heating level selected:
The switch is located on the respective
door.
Example illustration from Maybach with seat
ventilation*
1 Seat heating switch
Switch on ignition ( page 54).
Switching on seat heating
Press switch 1 twice.
Three red indicator lamps in the
switch come on.
Continue pressing switch 1 until de-
sired seat heating level is reached.
Switching off seat heating
Press switch 1 repeatedly until all in-
dicator lamps go out.
Seat heating
Level
3 Three indicator lamps on.
After approximately
five minutes, seat heating is
automatically switched to
level 2.
2 Two indicator lamps on.
After approximately
ten minutes, seat heating is
automatically switched to
level 1.
1 One indicator lamp on.
After approximately
20 minutes, seat heating is au-
tomatically switched off.
off No indicator lamp on.
i
The rear center seat* cannot be heat-
ed.
i
If one or all of the lamps on the seat
heating switch are flashing, there is
insufficient voltage due to too many
electrical consumers are turned on.
The seat heating switches off auto-
matically.
The seat heating will switch back on
again automatically as soon as suffi-
cient voltage is available.
To Next Page
Loading...
