374
Operation
Maintenance
Switch on ignition ( page 54).
The standard display of the control
system appears ( page 157).
Press button k or j on the mul-
tifunction steering wheel until the
maintenance service indicator with
the service symbol 9 or ´ and
the service deadline appear in the
multifunction display.
In the event that the maintenance ser-
vice on your vehicle is not carried out by
an authorized Maybach Studio, you can
have the maintenance service indicator
reset. The automotive maintenance facil-
ity carrying out the maintenance service
will find the information for resetting
the maintenance service indicator in the
maintenance-relevant information for
your vehicle. Such information is avail-
able from either your authorized
Maybach Studio or directly from
Mercedes-Benz USA, LLC.
Calling up the maintenance service in-
dicator
i
If the battery is disconnected, the
days of disconnection will not be in-
cluded in the count shown by the
maintenance service indicator. To ar-
rive at the true maintenance service
deadline, you will need to subtract
these days from the days shown in
the maintenance service indicator.
Do not confuse the maintenance ser-
vice indicator with the engine oil lev-
el indicator :.
Resetting the maintenance service in-
dicator
i
If the maintenance service indicator
was inadvertently reset, have an au-
thorized Maybach Studio correct it.
Only reset if the proper maintenance
service has been performed. Reset-
ting the system without performing
the proper service as called for by the
maintenance service indicator will re-
sult in engine damage and/or other
vehicle damage not covered by the
Maybach Limited Warranty.
To Next Page
Loading...