279
Controls in detail
Useful features
The vehicle is equipped with a battery
charge maintenance socket. The socket
allows for the connection of a battery
charge maintenance unit designed to
maintain the existing charge in the bat-
tery for electrical consumers while the
vehicle is parked and not being driven
for long periods of time (on average ap-
proximately three weeks or more). Not
driving the vehicle for such extended pe-
riods of time may cause the charge in the
battery for electrical consumers to drop.
The socket is located in the storage com-
partment on the left side of the trunk.
Only the battery charge maintenance
unit should be connected to this socket.
1 Handle
2 Battery charge maintenance socket
3 Storage compartment
Turn handle 1 90°.
Swing the cover down.
Connect the battery charge mainte-
nance unit to battery charge mainte-
nance socket 2. Follow the
manufacturer’s operating instruc-
tions.
It is only possible to maintain the existing
charge in the battery for electrical con-
sumers using the battery charge mainte-
nance unit connected to battery charge
maintenance socket 2.
i
In vehicles with non-smokers pack-
age*, an additional sockets is located
in the passenger footwell.
i
Make sure the override switch is not
activated (
page 94). The socket in
the rear center console will not func-
tion if the override switch is activated.
!
Make sure no fluids come into con-
tact with the socket, as this could
cause a short circuit.
Battery charge maintenance socket
i
You can obtain the battery charge
maintenance unit at any authorized
Maybach Studio. Check with an au-
thorized Maybach Studio for avail-
ability.
i
If the battery for electrical consumers
is discharged, it must be recharged us-
ing the battery charger. For more in-
formation, see "Practical hints"
(
page 441).