142
Controls in detail
Memory function
For easier parking you can adjust the pas-
senger exterior rear view mirror so that
you can see the right rear wheel as soon
as you engage reverse gear R.
For information on activating the park-
ing position, see "Setting parking posi-
tion for exterior rear view mirror"
(
page 184).
The buttons are located on the driver’s
door.
1 Exterior rear view mirror (passenger-
side)
2 Adjustment button
3 Memory button M
Stop the vehicle.
Switch on ignition ( page 54).
Press button 1.
The passenger-side exterior rear view
mirror is selected.
Adjust the exterior rear view mirror
with button 2 so that you see the
rear wheel and the road curb.
Press memory button 3.
Within three seconds, press bottom
of adjustment button 2.
The parking position is stored if the
mirror does not move.
Storing exterior rear view mirror
parking position
i
You can store a parking position for
the passenger side exterior rear view
mirror for each SmartKey or
SmartKey with KEYLESS-GO**.
i
If the mirror does move, repeat the
above steps. After the setting is
stored, you can move the mirror
again.
To Next Page
Loading...
