MAYBACH 57 - Combination Switch; Hazard Warning Flasher

147
Controls in detail
Lighting
The combination switch is located on the
left side of the steering column.
1 High beam
2 High beam flasher
High beam
 Turn exterior lamp switch to
position B or U (
 page 143).
 Push the combination switch in direc-
tion of arrow 1 to switch on the high
beam.
The high beam indicator lamp A in
the instrument cluster comes on.
 Pull the combination switch in direc-
tion of arrow 2 to its original posi-
tion to switch off the high beam.
The high beam headlamp indicator
lamp A in the instrument cluster
goes out.
High beam flasher
 Pull the combination switch briefly in
direction of arrow 2.
The hazard warning flasher can be
switched on at all times, even with the
SmartKey or SmartKey with
KEYLESS-GO** removed from the starter
switch or with the SmartKey with
KEYLESS-GO** removed from the vehi-
cle.
The hazard warning flasher switches on
automatically when an airbag deploys.
The hazard warning flasher switch is lo-
cated on the upper part of the front cen-
ter console.
1 Hazard warning flasher switch
Combination switch Hazard warning flasher