EasyManua.ls Logo

MAYBACH 57 - Page 304

MAYBACH 57
506 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
302
Controls in detail
Useful features
Remote door unlock
In case that you have locked your vehicle
unintentionally (e.g. SmartKey inside ve-
hicle), and the reserve SmartKey is not
handy:
Contact the Maybach Assistance Cen-
ter at
1-866-FOR-MAYBach (in the USA) or
1-888-881-6611 (in Canada).
You will be asked to provide your
password which you provided when
you completed the subscriber agree-
ment.
Then return to your vehicle and pull
the trunk recessed handle for a mini-
mum of 20 seconds until the SOS but-
ton is flashing.
The message
EMERGENCY CALL
CALL CONNECTED
appears in the multifunction display.
As an alternative, you may unlock the ve-
hicle via Internet using the ID and pass-
word sent to you shortly after the
completion of your Acquaintance Call.
!
If the indicator lamp continues to
flash or the system does not reset,
contact the Maybach Assistance
Center at
1-866-FOR-MAYBach (in the USA) or
1-888-881-6611 (in Canada).
i
The indicator lamp in the correspond-
ing button flashes until the call is con-
cluded. Calls can only be terminated
by a Response Center or Customer As-
sistance Center representative except
Roadside Assistance and Information
calls, which can also be terminated by
pressing button t on the multi-
function steering wheel or the re-
spective button for ending a
telephone call on the COMAND head-
unit.
i
When a Tele Aid call has been initiat-
ed, the COMAND system audio is
muted and the selected mode (radio,
tape or CD) pauses. The cellular
phone switches off. If it is necessary
for you to use this phone, then the
vehicle must be parked. Disconnect
the coiled cord and place the call. The
COMAND navigation system (if en-
gaged) will continue to run. The dis-
play in the instrument cluster is
available for use and spoken com-
mands are only available by pressing
the button on the COMAND
unit. A pop-up window will appear in
the COMAND display to indicate that
a Tele Aid call is in progress.

Table of Contents

Related product manuals