316
Controls in detail
Pocket PC remote control*
Your Pocket PC can be operated in two
ways. You can select your preferred
mode of operation by doing one of the
following:
Press main menu function button b,
c, e or f and then choose your set-
tings via navigation button d.
Tap on a menu symbol shown in dis-
play 9 (touch-screen) using your fin-
ger or stylus 7.
You can switch between these two
modes of operation at any time.
Removing and inserting the stylus
Removing
Press down briefly on stylus 7.
Stylus 7 is ejected upward.
Inserting
Insert stylus 7 into the opening and
press downward until it engages.
Indicator lamps
The blue Bluetooth wireless connection
indicator lamp 2
is out when the Bluetooth wireless ra-
dio has been switched off
flashes slowly when the Bluetooth
wireless radio has been switched on
The yellow battery charge indicator
lamp 6
is out when the battery is not being
charged
flashes when the battery is being
charged
comes on continuously when the bat-
tery is completely charged and the
Pocket PC is in the Pocket PC cradle.
Switching the Pocket PC on and off
Switching on
Switch on ignition ( page 54).
Press On/Off button 8.
The Bluetooth wireless connection in-
dicator lamp 2 flashes.
In display 9 you will see the follow-
ing in succession:
the Maybach logo for several sec-
onds
the Bluetooth wireless connection
status g shown in the status
line a until the Bluetooth wire-
less connection between the
Pocket PC and the vehicle has
been established
the time and the battery charge
status shown in the status line a.
The display is in color and you will see
a Bluetooth wireless connection sym-
bol in the status line a.
The Pocket PC is ready for use.
To Next Page
Loading...
