357
Operation
Engine compartment
Checking engine oil level
When checking the oil level the vehicle
must
be parked on level ground
be at normal operating temperature
have been stationary for at least five
minutes with the engine turned off
You can check the engine oil level on the
multifunction display.
Switch on ignition ( page 54).
The standard display (
page 157)
should appear in the multifunction dis-
play.
Press button k or j on the
steering wheel until the following
message is seen in the multifunction
display:
ENGINE OIL LEVEL
MEASURING NOW!
CORRECT MEASUREMENT
ONLY IF VEH. LEVEL
One of the following messages will
subsequently appear in the indicator:
ENGINE OIL LEVEL
OK
ADD 1.0 QT. TO
REACH MAX. OIL LEVEL
(Canada:
1.0 LITER
)
ADD 1.5 QTS. TO
REACH MAX. OIL LEVEL
(Canada:
1.5 LITERS
)
ADD 2.0 QTS. TO
REACH MAX. OIL LEVEL
(Canada:
2.0 LITERS
)
If necessary, add engine oil.
For adding oil, see (
page 359).
For more information on engine oil, see
"Technical data" (
page 464) and
(
page 465).
i
If you want to interrupt the checking
procedure, press button k or j
on the multifunction steering wheel.
To Next Page
Loading...
