378
Operation
Vehicle care
Cleaning the Distronic** system sensor
cover
1 Distronic system sensor cover
Clean the sensor cover 1 using a
mild car wash detergent, such as Car
Shampoo approved by us for use on
Maybach vehicles with plenty of wa-
ter and a soft, non-scratchy cloth.
To prevent scratches, never apply strong
force and use only a soft, non-scratchy
cloth when cleaning the sensor cover. Do
not attempt to wipe dirty sensors with a
dry cloth or sponge.
Cleaning the Parktronic system sensors
1 Parktronic system sensors
Clean the sensors 1 on the bumpers
using a mild car wash detergent, such
as Car Shampoo approved by us for
use on Maybach vehicles with plenty
of water and a soft, non-scratchy
cloth.
When using a steam cleaner or power-
wash, aim nozzle only briefly from a min-
imum distance of 12 in (30 cm) at
sensors 1.
To prevent scratches, never apply strong
force and use only a soft, non-scratchy
cloth when cleaning the sensor. Do not
attempt to wipe dirty sensors with a dry
cloth or sponge.
Wiper blades
Turn on the wipers and place them in
a vertical position.
For information on how to place the wip-
ers in a vertical position, see "Replacing
wiper blades" (
page 434).
i
Restart the engine after cleaning sen-
sor cover 1.
!
The windshield wipers must be in a
vertical position before folding them
away from the windshield. They
could otherwise damage the hood.
To Next Page
Loading...
