EasyManua.ls Logo

MAYBACH 57 - Page 470

MAYBACH 57
506 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
468
Technical data
Fuels, coolants, lubricants, etc.
To provide important corrosion protec-
tion, the solution must be at least 45%
anticorrosion/antifreeze [equivalent to
freeze protection to approximately –22°F
(–30°C)]. If you use a solution that is more
than 55% anticorrosion/antifreeze
[freeze protection to approximately
–49°F (–45°C)], the engine temperature
will increase due to the lower heat trans-
fer capability of the solution. Therefore,
do not use more than this amount of an-
ticorrosion/antifreeze.
If the coolant level is low, water and
MB 325.0 anticorrosion/antifreeze
should be used to bring it up to the prop-
er level (have cooling system checked for
signs of leakage). Please make sure the
mixture is in accordance with label in-
structions.
The water in the cooling system must
meet minimum requirements, which are
usually satisfied by normal drinking wa-
ter. If you are not sure about the water
quality, consult an authorized Maybach
Studio.
Anticorrosion/antifreeze
Your vehicle contains a number of alumi-
num parts. The use of aluminum compo-
nents in motor vehicle engines
necessitates that anticorrosion/anti-
freeze coolant used in such engines be
specifically formulated to protect the
aluminum parts. (Failure to use such
anticorrosion/antifreeze coolant will re-
sult in a significantly shortened service
life).
Therefore, the following product is
strongly recommended for use in your
vehicle: Maybach 325.0 Anticorrosion/
Antifreeze Agent.
Before the start of the winter season (or
once a year in hot southern regions), you
should have the anticorrosion/antifreeze
concentration checked. The coolant is
also regularly checked each time you
bring your vehicle to an authorized May-
bach Studio for service.
The anticorrosion/antifreeze quantities
listed in the table below are in relation
to total filling capacity.
Anticorrosion/antifreeze quantity
Approximately freeze protection
–35°F (–37°C) –49°F (–45°C)
Cooling system 9.0 US qt (8.5 l) 9.9 US qt (9.35 l)
Low temperature cooling system 1.16 US qt (1.1 l) 1.27 US qt (1.2 l)

Table of Contents

Related product manuals