56
Getting started
Unlocking
Position 1
Press KEYLESS-GO start/stop
button 1 once.
This supplies power to some electrical
consumers, such as seat adjustment.
Ignition (or position 2)
Press KEYLESS-GO start/stop
button 1 twice.
All lamps in the instrument cluster
come on. If a lamp in the instrument
cluster fails to come on when the ig-
nition is switched on, have it checked
and replaced if necessary. If a lamp in
the instrument cluster remains on af-
ter starting the engine or comes on
while driving, refer to "Lamps in in-
strument cluster" (
page 384).
For information on starting the engine
using the KEYLESS-GO start/stop button,
see "Starting with KEYLESS-GO**"
(
page 66).
i
If you now press the KEYLESS-GO
start/stop button
once again, the ignition
(position 2) is switched on
twice, the power supply is again
switched off
i
If you now press the KEYLESS-GO
start/stop button once, the power
supply is again switched off.
i
When you switch on the ignition, the
indicator and warning lamps in the
instrument cluster come on. This indi-
cates that the respective systems are
operational. They should go out
when the engine is running.
To Next Page
Loading...
