WARNING
Do not adhere the speed
restriction sticker to the padded
area on the steering wheel.
Adhering the speed restriction
sticker to the padded area on the
steering wheel is dangerous
because the air bag may not
operate (deploy) normally resulting
in serious injury. In addition, do not
adhere the sticker to areas where
warning lights or the speedometer
cannot be viewed.
CAUTION
Do not apply speed restriction
stickers on the instrument panel
or displays. Otherwise, the
instrument panel or displays
could be scratched or damaged
when removing the sticker.
Remove the speed restriction
sticker immediately after repair or
replacement of a tire.
14.Adhere the repaired tire sticker to
the wheel of the flat tire.
15.When the tire inflates to the
specified tire inflation pressure, turn
the air compressor switch off, turn
the sleeve of the injection hose to
the left, and pull it out of the tire
valve.
16.Remove the air compressor hose
from the injection valve of the
bottle. After that, install the
injection hose to the injection valve
of the bottle to prevent leakage of
any remaining sealant.
CAUTION
The remaining sealant in the hose
may spray out when the hose is
removed. Remove the hose
carefully because you may not be
able to remove the sealant
contacting clothing or other
objects.
17.Install the tire valve cap.
18.Put the emergency flat tire repair kit
into the trunk.
19.Start driving immediately to spread
the sealant in the tire.
What to Do in Case of Emergency
Tire is Punctured or Bursts
8-25
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
