McCulloch Mini-Mac 6 User Manual

SPARK PLUG
A clean, properly gapped spark plug" is a major factor in easy starting and best
performance. When starting or performance is not satisfactory, the plug
should be cleaned and gapped.
To clean and gap the sparl{ plug --
1. Remove the rubber connector from
the spark plug. Figure 14.
2. Remove the spark plug with a spark
plug wrench.
3.
Clean the electrodes with emery clQth or very fine sandpaper. not use
a spark plug cleaning machine. It is almost impossible to clean the grit
from the spark plug.) Blow all dust away.
4. Adjust the side electrode to a gap of 0.025 inch (0.635 mm).
5. Wipe all dirt off the white porcelain insulator and reinstall the spark plug and
connector. .
20

McCulloch Mini-Mac 6 Specifications

General

Brand	McCulloch
Model	Mini-Mac 6
Category	Chainsaw
Language	English