McCulloch Mini-Mac 6 User Manual

spike, let the moving saw chain draw the spike tight against the tree. The
spike will act as a fulcrum. On a small tree, the felling cut can be made
from one side. On a larger tree, make the felling cut from both sides. You
cha then see what you are doing and will be able to leave an equal amount of
wood
as a hinge.
LIM BING
Limbing is the process of removing limbs from either standing or fallen trees.
Make sure you are out of the way of any falling limbs. If the tree lies on
sloping ground, cut off the limbs which are off the ground first. Be sure to
stand on the uphill side of the tree when cutting on sloping ground.
PRUNING
Pruning is removing unwanted limbs
from a standing tree to improve the
tree 's appearance . It is advisab l e to
attach the saw to a rope so you can
pull it up into the tree after you. Keep
the rope tied to the saw while cu tt ing
and tie the other end to the tree so the
""-----,
15

McCulloch Mini-Mac 6 Specifications

General

Brand	McCulloch
Model	Mini-Mac 6
Category	Chainsaw
Language	English