McCulloch Mini-Mac 6 User Manual

CARBURETOR ADJUSTMENT
While the carburetor was set at the factory, it may be necessary due to local
conditions to readjust it. As carburetor adjustment is critical and if done
carelessly can damage the carbure tor and engine, it should be done by a Mc-
Culloch chain saw service technician. In an emergency or to satisfy an im -
mediate need until your serviceman can do it properly, you can by carefu lly
following the steps indicated, temporarily adjust the carburetor. NOTE: Before
making any carburetor adjustments make Sure the air filter is clean . Very
often a dirty air filter will make the engine operate as though the carburetor
needed adjustment. Cleaning the air . the~~~~ __
1. Carefully tUrn the idle and high
speed adjustment needles clock-
wise until resistance is felt. Do
not turn the needles in too tight
or you can dama ge the tips of the
needles and their seats. Then open
(turn coonterclockwise)
each needle
1 turn.
22
,.

McCulloch Mini-Mac 6 Specifications

General

Brand	McCulloch
Model	Mini-Mac 6
Category	Chainsaw
Language	English