McCulloch Mini-Mac 6 User Manual

DIRT & SAWDUST
U's natural for any saw to acquire dirt and sawdust when it's used. But the
saw must be kept clean for proper operation. In addition to the air filter, the
openings in the fan housing, the cooling fins and the area around the sprocket
must be kept clean. The fins and sprocket area are accessible after removing
the clutch guard. Scrape the dirt away with a blunt wooden scraper or wash it
.... with solvent. A bottle brush or o ld tooth brush will he lp. When the saw is clean,
reinstall the clutch guard. Tighten all attaching screws and nuts securely.
SPROCKET
The sprocket is part of the clutch drum
which is held on the crankshaft by the
clutch rotor. The drum bushing should
be lubricated frequently with a good
grade of non-fibrous chassis grease .
To remove the sprocket and drum for
lubrication or replacement, proceed
as follows:
24

McCulloch Mini-Mac 6 Specifications

General

Brand	McCulloch
Model	Mini-Mac 6
Category	Chainsaw
Language	English