McCulloch Mini-Mac 6 User Manual

For shipping purposes, fuel is removed from the engine after the engine is
tested. Lack of use or a period of storage can also result in removing or evap-
orating all fuel from the engine.
Under these circumstances, it can be easier to start the engine in the following
manner: Remove the air filter cover and air filter. Hold the saw bar nose
down and inject about 1/2 teaspoon of fuel mixture through the carburetor air
intake. (An oil can with the proper fuel mixture is ideal (or this purpose.) Do
not flood the engine. Turn the saw so as to move the fuel mixture through the
duct and carburetor into the crankcase. Usually two or three pulls of the starter
rope will draw fuel into the combustion chamber and start the engine. It may
be necessary to repeat the injection two or three times before the engine wi ll
run by itself. Replace the air filter and air filter cover. Never cut with the
air filter and air filter cover removed from the engine.
DO NOT USE THIS METHOD FOR REGULAR STARTING.
37

McCulloch Mini-Mac 6 Specifications

General

Brand	McCulloch
Model	Mini-Mac 6
Category	Chainsaw
Language	English