McCulloch Mini-Mac 6 User Manual

3. Place the new chain around th e sprocket and bar. The cutting edges of the
chain along the top of the bar face toward the nose.
4. Fit the adjustment nut tang into the bar and install the c lut ch guard. Tighte n
the bar mrunting nut finger tight.
5. Adjust chain tension.
CHAIN TENSION
Chain tension is correct when, with the bar nose held up and the chain snug
on the bar , the chain can still be easily pulled around the bar.
1. Loosen the bar mounting nut .
2.
Turn the chain tension screw clockwise until cha in is snug with the bar nose
held up.
3.
While still holding bar nose up, tighten the bar mounting nut secure ly.
28

McCulloch Mini-Mac 6 Specifications

General

Brand	McCulloch
Model	Mini-Mac 6
Category	Chainsaw
Language	English