McCulloch Mini-Mac 6 - Chain Care and Repair; Keeping the Chain Clean; Handling Chain Breaks

4. Always file depth gauges at the same place on the bar in or der to assu r e
uniformity.
KEEP CHAIN CLEAN
After s harpening chain , pull it slowly around the bar while pumpin g the manual
oil button frequ e ntly. This will help flush filin gs and dirt off th e cha in. If the
chain is very dirty, remove it from th e saw and wash it in kerosene or so lv ent
to remove dirt and filings . Soak the chain in SAE 30 motor oil to lubricate
it and prevent rust before putting it ba ck on the saw .
IF CHAIN BREAKS
If the chain breaks, take it to your McCulloch chain saw deal er or serviceman.
He can repair it. He will also check th e conditio n of the bar and sprocket and
help
to keep y our chain saw in operating condition.
35