McCulloch Mini-Mac 6 - Chain Lubrication; Automatic Oiler Adjustment

Your chain is lubri cate d with oil from the chain oil tanle Fill the oil tank each
time you fill the fuel tan1e
We r ecommend using McCulloch Chain , Bar and Sprocket Oil which co ntains
additives to reduce friction and wear and to assist in the prevention of pitch
for mation on the bar and chain . If McCulloch Chain , Bar and Sprocket Oil is
not available, use SAE 30 non-additive motor oil at temperatures above 40 and
SAE 10 non-additive motor oil at lower temperatures.
Keep the oil supply container clean. Wipe the oil tank cap and the o il tank
surrounding the fill area clean before filling the oil tank. Do not use dirty or
reclaimed motor oils under any circumstances. Dirt can plug the chain oiling
system. Never operate your saw if the oiler system does not work.
AUTOMATIC OILER ADJUSTMENT
Some Mini Mac 6 saws are equipped with an automatic cha in oiler. adjusted
at the factory for average cutting conditions. Oil now may be adjusted however,
6