McCulloch Mini-Mac 6 - Page 7

to suit individual desires by an adjustment screw at the front of the saw. Turn
the screw clockwise to decrease oil fl ow and counterclockwise to in c reas e it.
The automatic oiler adjust m ent
screw should never be t urn ed more
than a qu arter turn at a ti me without
checking the oil flow after the ad-
justment. Maximum o il flow can
em pty the ch ain o il tan k in ap proxi-
mately ten minutes of cutti ng. Where
increased oil flow is desired for
short periods, it is better to sup-
pl ement the o il flow by mor e frequent
use of the manual oiler button. The
automatic oiler supplies o il when-
ever the engine is running. Long
periods at idle speed can result in
oil puddl es beneath the saw and
wasted oil. It is advisable to turn
the saw off between cu ts unless it is
in almost contin uous us e.
7