McHale Fusion Vario Baler & Wrapper
40
5.4 Preventing unauthorised use
To prevent unauthorised use, McHale recommend using the padlock and the locking
device provided. Both items are stored in the tool box on the machine and should be
fitted to the drawbar coupling when the machine is not in use.
Couplings with holes
(Swivel hitch, drawbar eyes or coupling rings)
Place the steel plate through the hitch eye from the top
Attach the padlock underneath, through either hole in the device
Once the padlock is locked, the machine should be secure
Other couplings
Slide the keeper plate to the mid-point of the top of the coupling
Hinge the second plate and rotate upwards until the holes align
Attach the padlock through the hole in the device, as indicated
Once the padlock is locked, the machine should be secure
To Next Page
Loading...
