Page 30
SMS programming and control
System Status Examples [**][UUUU][S][##]
System Status Status = **1111S##
Firmware version iRIS8 F/W: V7.82 iRIS8 F/W: V7.82 iRIS8 F/W: V7.82
Arm/Disarm Status System Status Disarmed System Status Full Armed System in ALARM, Zones 2
PSTN Status PSTN OK PSTN Failed PSTN Disabled
AC Power AC Power OK AC Power Failed AC Power Not Connected
Battery Battery OK Battery Low Battery OK
Isolates Zones Isolated NONE Zones Isolated 02,08 Zones Isolated 03
GSM Signal/Reg Signal Strength 100% (31) Signal Strength Excellent (28) Signal Strength Very Poor (4)
Example SMS’s received….
*1111S## ;Invalid Command ( only 1 asterisk )
**1112S## ;Invalid User Code ( 1112 is not programmed in the panel )
**1111x## ;Invalid Command ( x is an invalid command )
**1111S ## ;Invalid User Cmd Format ( has a space after the S command )
**1111A## ;System Armed by User 1
**1111A## ;System Already Armed
**1111P## ;System Partial Armed by User 1
**1111P## ;System Already Partial Armed
**1111d## ;System Disarmed by User 1
**1111a## ;System Not Armed, Zones 6 Open (assuming zone 6 is open )
**111105t## ;PGM Output Not Programmed ( Function 80 isnt programmed for SMS control )
**111105t## ;PGM Output On
**111105t## ;PGM Output Off
To Next Page
Loading...