October 2008 "2033ES / 2633ES" Service & Parts Manual - ANSI Specifications
Page VIII
ART_2156
Filler Cap with Strainer
Sight
Gauge
Return
Filter
Fluid Level
Wheel Mount /
Pivot Point
Steel Hydraulic Reservoir
(early models)
1
Plastic
Hydraulic Reservoir
(late models)
1
3
2
LUBRICATION
SPECIFICATION
Fill to the middle of the sight gauge
with platform in the stowed position.
Anti-Wear 150 SSU
(ISO 32/mil spec 0-5606)
FREQUENCY OF LUBRICATION
Check daily.
Change yearly or every 1,000 hours,
whichever occurs first.
ITEM
Hydraulic
Reservoir
NO.
1
Change every six months or 500
hours, whichever occurs first for
normal usage.
Change every three months or 300
hours, whichever occurs first for
severe usage.
Weekly or every 25 hours,
whichever occurs first
Filter element
Lithium N.L.G. #2 EP
purge old grease
Hydraulic
Filter
Wheel
Motor
Mount
2
3
To Next Page
Loading...
