"2033ES / 2633ES" Service & Parts Manual - ANSI Specifications October 2008
Page I
INTRODUCTION
This manual consists of Service and Parts sections.
The Service Section of this manual is designed to provide you, the customer, with the instructions
needed to properly maintain the MEC self-propelled scissor lift. When used in conjunction with
the illustrated
Parts Section
and the
Operators Manual
(provided separately), this manual will
assist you in making necessary adjustments, repairs, identifying, and ordering the correct re-
placement parts.
All parts represented here are manufactured and supplied in accordance with MEC’s quality
standards.
We recommend that you use Genuine MEC parts to insure proper OPERATION and reliable
PERFORMANCE.
To obtain maximum benefits from your MEC scissor lift, always follow the proper operating and
maintenance procedures. Only trained authorized personnel should be allowed to operate or
service this machine. Service personnel should read and study the
Operator’s
and
Service and
Parts Manual
in order to gain a thorough understanding of the unit prior to making any repairs.
To help you recognize important safety information, we have identified warnings and instructions
that directly impact on safety with the following signals:
“DANGER” INDICATES AN IMMINENTLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS
INJURY. THIS SIGNAL WORD IS LIMITED TO THE MOST EXTREME
SITUATIONS.
“WARNING” INDICATES A POTENTIALLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS
INJURY.
“CAUTION” INDICATES A POTENTIALLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, MAY RESULT IN MINOR OR MODERATE
INJURY. IT MAY ALSO BE USED TO ALERT AGAINST UNSAFE
PRACTICES. “CAUTION” IS USED FOR PROPERTY-DAMAGE ONLY
ACCIDENTS.
To Next Page
Loading...
