Mec 6092RT - Starting Engine from Upper Control Box

Page 16 93808 – October 2014
6092RT Operating Instructions
Starting Engine from Upper Control Box
• Lower Control Box: Turn the Key Switch to PLATFORM.
Diesel Engine
• Upper Control Box: Turn the Engine Start Switch to START - release when the
engine starts.
• Cold Start: lift and hold the GLOW Switch as indicated in the Preheat table.
• With the GLOW Switch held, turn the START Switch until the engine starts.
• Release both switches once the engine starts.
ART_2406 R1
ART_3188 R1
Preheat Table
Ambient Temperature Preheat Time
Above 50°F (10°C) 5 Seconds
50°F to 23°F (10°C to –5°C) 10 Seconds
Below 50°F (–5°C) 20 Seconds
20 Seconds = Limit of Continuous Use