Page 2 93808 – October 2014
6092RT Safety
Safety
DO NOT operate this machine until you have read and understood the Safety section of this manual, have performed the Jobsite
Inspection, Pre-Start Inspection and Routine Maintenance, and have completed all the test operations detailed in the Operating
Instructions section.
Failure to read, understand and follow all safety rules, warnings, and instructions will unnecessarily expose you and others to
dangerous situations. For your safety and the safety of those around you, you must operate your machine as instructed in this manual.
MEC designs aerial work platforms to be safe and reliable. They are intended to position personnel, along with their necessary tools
and materials, to overhead work locations. The owner/user/operator of the machine should not accept responsibility for the operation
of the machine unless properly trained.
Never perform service on the machine with the platform elevated without first blocking the scissor assembly using the maintenance
lock (see Maintenance Lock on page 32).
Safety Alert Symbols
MEC manuals and decals use symbols and colors to help you recognize important safety, operation and maintenance information.
RED – Indicates an imminently hazardous situation which, if not avoided, will result in death or serious
injury.
ORANGE – Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
YELLOW with alert symbol – Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
YELLOW without alert symbol – Indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
To Next Page
Loading...
