EasyManua.ls Logo

Mec 6092RT - Fall Hazards; Collision Hazard Avoidance

Mec 6092RT
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
93808 – October 2014 Page 7
6092RT Safety
Fall Hazards
DO NOT sit, stand or climb on the platform guard rails. Maintain a firm footing on the
platform floor at all times.
DO NOT exit the platform when elevated
DO NOT climb down from the platform when elevated.
Keep the platform floor clear of debris.
DO NOT fasten a fall restraint lanyard to an adjacent structure.
Ensure that the entry is properly closed before operating the machine.
Operators must comply with employer, job site and governmental rules regarding the use of
personal protective equipment.
Collision Hazards
Be aware of blind spots while operating this machine.
Watch for overhead obstructions when elevating the platform.
Watch for crushing hazards when holding the platform rail.
Reduce travel speed when moving the machine on slopes, when near personnel and obstacles,
or when surface conditions are wet, slippery or otherwise limiting.
DO NOT operate in the path of any crane unless the controls of the crane have been locked out
and/or precautions have been taken to prevent any possible collision.
Stunt driving and horseplay are PROHIBITTED.
Art_2826
Art_2825
DO NOT EXIT PLATFORM WHEN
ELEVATED
DO NOT CLIMB ON RAILS
Art_2835
Art_2829
Art_2827

Related product manuals