Page 32 93808 – October 2014
6092RT Maintenance
Routine Maintenance
IMPORTANT— The operator may perform routine maintenance only. Scheduled maintenance must be performed by qualified
service technicians.
Pre-Start Inspection Perform routine maintenance as identified in the Pre-Start Inspection Checklist on page 27.
Scheduled Maintenance
Maintenance performed monthly, quarterly, annually and bi-annually must be performed by a
qualified service technicians trained and authorized to perform maintenance on this machine,
and must be done in accordance with the procedures outlined in the service manual. Scheduled
maintenance inspection checklists are included in this manual for use by qualified service
technicians.
Machines that have been out of service for more than three months must receive the quarterly
inspection before returning to service.
Maintenance Lock
Never perform service on the machine with the platform elevated without first blocking the scissor
assembly using the maintenance lock.
Set Maintenance Lock
1 Elevate platform approximately 16 feet (5 m) and rotate maintenance lock to Blocked
position
2 Lower platform until scissor assembly comes to rest on the maintenance lock.
3 Scissor assembly is blocked.
ART_3034
To Next Page
Loading...
