Split point
The key that splits the keyboard into the left and right hand areas is
called "split point". The default split point is F#3 (34) , however, you can
assign it to any other key.
1. Press and hold [FUNCTION], then press the key marked [SPLIT] to
edit the split point, and then tap a key on the keyboard to assign the
split point to that key.
2. Release the [FUNCTION] button to exit the edit mode.
Voice Volume
You can adjust separately the volume of the upper voice, the dual voice
and the lower voice.
1. Press and hold [FUNCTION], then press the key marked [R1-VOL]
to edit the volume of the upper voice.
2. In edit mode, press and hold [FUNCTION], then use the keys
marked SETTING [<]/[>] to adjust the volume range from 0 to 15.
3. In edit mode, press and hold [FUNCTION], then press SETTING [<]
and [>] keys at the same time to reset the volume to default.
4. Set the volume of the dual voice and lower voice in the same way.
Playing a Voice Demo
1. In Voice mode, press and hold [FUNCTION], then press the key
marked [V-DEMO] to start playing the current upper voice demo.
2. During demo playback, press and hold [FUNCTION], then press the
[V-DEMO] key to stop playing. You can also press the
[START/STOP] button to stop the playback.
Touch Response
The touch response feature allows you to expressively control the
voice level based on your playing dynamics, just as on an acoustic
instrument. There are 5 types of touch settings (Off, 1–5). The default
setting is 3.
1. Press and hold [FUNCTION], then press the key marked [TOUCH]
to edit the touch setting.
2. In edit mode, press and hold [FUNCTION], then use the keys
marked SETTING [<]/[>] to change the setting.
3. In edit mode, press and hold [FUNCTION], then press SETTING [<]
and [>] keys at the same time to restore the default setting.
Playing the Voices
13
Parameter
OFF
1
2
3
4
5
Description
Fixed
Soft 1
Soft 2
Medium
Hard 1
Hard 2
FUNCTION
FUNCTION
To Next Page
Loading...
