After Sales Support TEL: 1 300 884 987 WEB Support: www.medion.com.au
18
Getting Started
Before you get started using your notebook, first take a few moments to read the
important section on Safety. This notebook comes with software fully pre-installed. You
do not have to install software from any of the discs supplied.
How to Start:
Step 1
Insert the battery before bringing the notebook into operation by sliding the battery
pack into the compartment (). The battery should remain locked () in order to
avoid it falling out.
Connect the supplied power adapter to the notebook at the notebook power
socket (12). Connect the power adapter via a power cable to a free AC power
outlet. Set the switch on the power adapter to the I setting, in order to supply the
notebook with electricity and to charge the battery.
(Set the switch to 0 to interrupt the electricity supply.)
To Next Page
Loading...
Need help?
General