page 9 of 73
The controller's LCD screen shows various types of information re. the router. E.g. during the
start up procedure, it shows the machine model. Once the controller connects properly to the PC,
the display will show Connected. If there is a problem with the controller-PC connection, the
display will read Disconnected.
Below the controller's main display, there is the spindle inverter's display. Both the display and
the small keyboard below are used for diagnostics and servicing only and the customer should not
be making any adjustments unless clearly instructed by a MegaPlot technician.
www.megaplot.com phone: +48 693 707 575 office@megaplot.com
To Next Page
Loading...
