Resistance, Inductance, and Capacitance Test Specifications
Table 22: Resistance test specifications.
Parameter Value
Measurement range 0.001 mΩ–100 kΩ
4-wire measurement Yes
Maximum test current 10 A
Accuracy ±2% ±0.25 mΩ
Table 23: Inductance test specifications.
Parameter Value
Measurement range 0.01 µH–10 H (120 Hz)
0.01µH–200 mH (1000 Hz)
4-wire measurement Yes
Test frequency 120, 1000 Hz
Accuracy ±5% ±5 µH
Table 24: Capacitance test specifications.
Parameter Value
Measurement range 0.01 nF–50 µF
4-wire measurement Yes
Test frequency 4000 Hz
Accuracy ±5% ±1 nF
Table 25: ADX testing and safety standards compliance.
Standard Topic
IEC 61326-1 Ed. 2.0 2012-07 Electrical equipment for measurement, control and laboratory use - EMC
requirements - Table 1
FCC 47CFR: Part 15 Subpart B: 2020 Unintentional Radiators
ICES-003 Issue 7, October 2020 Limits and Methods of Measurement to Information Technology Equipment (including
Digital Apparatus).
IEC 61010-031:2015 Safety requirements for electrical equipment for measurement, control, and
laboratory use. Safety requirements for hand-held probe assemblies for electrical
measurement and test.
IEC 61010-2-034:2017 Safety requirements for electrical equipment for measurement, control, and
laboratory use. Particular requirements for measurement equipment for insulation
resistance and test equipment for electric strength.
IEC 62133-2:2017 Safety Test Standard of Li-Ion
CISPR 11:2009 +A1:2010, Class A Radiated Emissions and AC Mains Conducted Emissions
IEC 61000-3-2:2014 Harmonics
IEC 61000-3-3:2013 Flicker
IEC 61000-4-2:2009 Electro-Static Discharge Immunity Test
IEC 61000-4-3:2010 Radiated, Radio-Frequency, Electromagnetic Immunity
IEC 61000-4-4:2012 Electrical Fast Transient/Burst Immunity Test
IEC 61000-4-5:2006 Immunity to Surges
IEC 61000-4-8:2010 Power Frequency Magnetic Field Immunity Test
IEC 61000-4-11:2004 Voltage Dips/Interruptions Immunity Test
For more safety compliance information, see “EU Declaration of Conformity” in Notices—front section.
www.megger.com
Megger Baker ADX User Guide
168
Resistance, Inductance, and Capacitance Test Specifications
To Next Page
