Footswitch
You can connect the footswitch (optional) to the Baker ADX host or auxiliary units; it works in parallel with the Start
(PTT) button. The footswitch enables hands-free use of the unit and gives you additional operating position options.
Fig 16: Footswitch accessory.
Remote E-Stop and Lights Accessory
The remote Test Status Indication Lights (TSIL) and Test Status Indication Lights E-Stop (TSIL-ES) accessories show
operators and bystanders when power is being applied to a device under test. The remote E-Stop is used to stop high-
voltage testing in the event of an emergency.
Fig 17: Remote E-stop and lights accessory.
No Description
1 Remote Test Status Indication Lights E-Stop (TSIL-ES)
2 Remote Test Status Indication Lights (TSIL). A Stop Jumper must be installed on the open connector if a
remote E-Stop (1) is not used.
www.megger.com
Megger Baker ADX User Guide
18
Armature Test Accessories
To Next Page
Loading...
