CS033663DE ZP-CS01E TORKEL 900-SERIES
7
1 INTRODUCTION
1.3 Receiving instructions
▪ Check the equipment received against the packing list to
ensure that all materials are present. Notify Megger of any
shortage.
▪ Examine the instrument for damage received in transit. If
damage is discovered, file a claim with the carrier at once
and notify Megger, giving a detailed description of the
damage.
▪ This instrument has been thoroughly tested and inspected
to meet rigid specifications before being shipped. It
is ready for use when set up as indicated in this user
manual.
1.4 Warranty
Products supplied by Megger are warranted against
defects in material and workmanship for a period of
one year following shipment.
Our liability is specifically limited to replacing or repair-
ing, at our option, defective equipment.
This warranty does not include batteries, lamps or
other expendable items, where the original manufac-
turer’s warranty shall apply.
We make no other warranty. The warranty is void
in the event of negligence abuse (failure to follow
recommended operating procedures) or failure by the
customer to perform specific maintenance as indi-
cated in this manual.
Warranty repair
Equipment returned to the factory for repair must be
shipped prepaid and insured.
Contact your Megger representative for instructions
and a return authorization (RA) number.
Please indicate all pertinent information, including
problem symptoms.
Also specify the serial number and the catalog num-
ber of the unit.
To Next Page
Loading...
