4.3 PC Software Installation
Before installing PC software, contact your
IT department. Your IT department can
assist with install and provide administrator
approval if required.
The TTRU3 can be controlled from the Touchscreen
or from a connected PC with the PC SW installed. To
install the PC SW:
1. Insert the included thumb drive
-OR-
Connect the TTRU3 to your PC with the included
USB Cable and turn the TTRU3 on. After initiali-
zation, a CD drive will appear on your PC which
contains the software
-OR-
Download the latest PC SW from www.megger.
com/TTRU3
2. Locate the file named TTRU3_installer_X.xx.exe.
X.xx is the version.
3. Double click to launch the installer.
4. Select a Language for the install and click OK.
5. Click Next.
6. Review License Agreement and Click I Agree.
7. Choose components and Select Next.
Defaults recommended.
8. Select Destination folder and click Install.
Defaults recommended.
9. Click Finish to complete the installation.
Preparing for test
18 TTRU3 User Manual us.megger.com
To Next Page
Loading...
