EasyManua.ls Logo

Melitta LATTEA - Page 73

Melitta LATTEA
268 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
73
Simultaneously press the button for single-cup dispensing and the
On / Off button for more than 2 seconds.
The standby symbol is illuminated after a brief heat-up phase. Subse-
quently, the symbol for the water reservoir will be illuminated.
Flip up the lid of the water reservoir (Fig. A, no. 7) and pull the water
reservoir up and out of the appliance.
The symbol for the milk shower is illuminated.
Place a bowl under the milk shower.
Turn the rotary switch for the milk shower clockwise to open the milk
shower.
Warning!
Danger of scalding due to hot steam
Avoid scalding injuries from the milk shower when evaporating the appli-
ance.
Water runs out of the milk shower and into the bowl; also steam escapes. The
symbol for the milk shower is ashing.
When steam no longer escapes, turn the rotary switch for the milk shower
anticlockwise to close the milk shower.
The appliance has been dried out.
Note
The Melitta Claris
®
water lter should not remain dry over a longer period
of time. Consequently we recommend storing the Melitta Claris
®
water
lter in a glass of water in the refrigerator if the device will not be used for
a longer period of time.
Heft_Lattea_EU.indd 73 09.07.2009 15:29:12

Table of Contents

Related product manuals