Mercury 200 VERADO User Manual

MAINTENANCE
109
2. Remove crankcase ventilation hose.
3664
a
b
c
d
a - Crankcase ventilation
hose
b - Fuel System Module
(FSM) purge valve
hose
c - Filter assembly
d - Clamp screw
3. Remove air filter assembly and disconnect Fuel System
Module (FSM) purge valve hose by rotating the air filter
assembly and pulling on hose.
3665
4. Wash air filter assembly in warm soap water.
5. Dry filter assembly with compressed air.
6. Apply 4-Cycle Outboard Oil on rag or towel and lightly pad air
filter element. Wipe off excess oil. Air filter element should be
moist to the touch.

Mercury 200 VERADO Specifications

General

Engine Type	4-Stroke
Gear Ratio	1.85:1
Full Throttle RPM Range	5800-6400 RPM
Fuel System	Electronic Fuel Injection (EFI)
Exhaust	Through Prop
Horsepower	200 HP
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20", 25"
Starting	Electric
Fuel Type	87 Octane
Cylinder Configuration	Inline-6
Cooling System	Water-cooled with thermostat