Mercury 200 VERADO User Manual

GENERAL INFORMATION
23
WHILE BOAT IS STATIONARY
21626
a
b
a - Running the engine when the boat is moored in a confined
space
b - Mooring close to another boat that has its engine running
WHILE BOAT IS MOVING
a
b
21628
a - Running the boat with the trim angle of the bow too high
b - Running the boat with no forward hatches open
Selecting Accessories For Your Outboard
Genuine Mercury Precision or Quicksilver Accessories have been
specifically designed and tested for your outboard. These
accessories are available from Mercury Marine dealers.
!
WARNING
Check with your dealer before installing accessories. The misuse
of approved accessories or the use of non-approved accessories
can result in product failure, serious injury, or death.
Some accessories not manufactured or sold by Mercury Marine
are not designed to be safely used with your outboard or outboard
operating system. Acquire and read the installation, operation, and
maintenance manuals for all your selected accessories.

Mercury 200 VERADO Specifications

General

Engine Type	4-Stroke
Gear Ratio	1.85:1
Full Throttle RPM Range	5800-6400 RPM
Fuel System	Electronic Fuel Injection (EFI)
Exhaust	Through Prop
Horsepower	200 HP
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20", 25"
Starting	Electric
Fuel Type	87 Octane
Cylinder Configuration	Inline-6
Cooling System	Water-cooled with thermostat